Buyer's Guide

Capsule House Price 2026: What You Actually Pay

What a capsule house price covers: delivery terms, the specification choices that move the number, what is excluded, and how to compare two quotes.

Showroom photograph of two capsule home models standing side by side on an outdoor display lot

Buyers ask for a price and receive a number, and the number is usually meaningless on its own - not because suppliers are being evasive, but because a capsule house quotation depends on configuration, delivery term and destination, and because two quotes that differ by a wide margin frequently describe the same product delivered to different points. This page explains how the price is structured, which variables actually move it, and how to make two offers comparable. It stays on price levels and quotation basis; the broader question of total project cost and payback is treated separately in our cost guide.

Start With the Delivery Term

Before comparing any two numbers, establish what each one covers. This single step resolves most apparent price differences.

TermWhat the seller coversWhat you still pay for
Ex-worksThe unit, at the factory gateLoading, all freight, insurance, duties, everything onward
FOBUnit delivered onto the vessel at the port of originOcean freight, insurance, duties, inland transport, placement
CIFAs FOB plus ocean freight and insurance to the destination portDuties, port charges, inland transport, placement, site works
DDPDelivered, duties paid, to a named destinationWhatever happens after that named point - often the island or the site

The critical question with DDP is where the named place is. A DDP price to a mainland port and a DDP price to a resort site are very different offers, and the gap is frequently larger than the difference between two competing suppliers' unit prices.

What Moves the Number

Seven variables account for most of the variation between quotations for superficially similar units.

  • Model and size. The largest single driver. Compact, mid-size and two-level configurations sit in different bands.
  • Specification level. Insulation, glazing, interior finish and services are configurable; the spread here is substantial.
  • Destination electrical requirements. Voltage, frequency and any local equipment needs affect cost and lead time.
  • Climate-driven choices. Coastal, desert and cold specifications differ in materials and equipment.
  • Quantity. Unit price generally improves with volume, but freight does not scale linearly.
  • Customisation. Non-standard items carry both a cost and a lead-time premium.
  • Order timing and production slot. Where capacity is tight, timing affects price.

Of these, specification is the one buyers most often fail to control - and an uncontrolled specification is why two quotes for "the same model" can differ by a wide margin.

Quotation paperwork on a desk beside a scale model of a capsule home
A quotation without a written specification attached is not comparable with any other quotation.

What Is Usually Included - and Not

Precise scope varies between suppliers, which is exactly why it should be confirmed in writing. The following reflects common practice rather than a rule.

  • Usually included: the unit as specified, factory fit-out, integrated services up to the connection point, standard factory testing, export packing to the agreed term.
  • Commonly excluded: foundation and site works, crane and placement, utility connections, import duties and taxes, inland transport beyond the named place, permits and approvals, and any locally supplied appliances.
  • Frequently ambiguous: spare parts, supervision of installation, commissioning attendance, and the documentation pack. Ask about each explicitly.

The ambiguous group is where budgets overrun. Each of those four items is small relative to the order and large relative to the contingency most buyers hold.

Making Two Quotes Comparable

Four steps, in order, before any comparison is meaningful.

  • Freeze your specification and send the same written version to every supplier.
  • Request the same delivery term and, ideally, the same named destination.
  • Ask explicitly what is excluded. A quote that lists exclusions is more useful than one that does not.
  • Convert to a delivered-and-commissioned figure yourself, adding your known local costs. That is the only number worth comparing.

Our article on requesting comparable quotes provides the request format that produces this result.

Handwritten calculation sheet and product brochures laid out on a buyer's desk
Converting each offer to a delivered-and-commissioned figure is the only comparison that reflects reality.

Why Published Price Figures Are of Limited Use

It is reasonable to want a number, and it is worth being direct about why published figures mislead.

  • Any figure dated today is stale quickly. Material, freight and currency inputs all move.
  • Any figure without a configuration is not a price for anything in particular.
  • Any figure without a destination excludes the most variable components.
  • Freight to some destinations can be a large share of the delivered figure - occasionally comparable to the unit itself for remote island sites.

The useful output is not a published number but a structured quotation: written specification, stated delivery term, named destination, stated exclusions and a validity period. Ask for that and comparison becomes straightforward.

Where to Go Next

Currency, Payment Terms and Timing

On an export order the quoted number is only part of the commercial picture, and two of the remaining parts are frequently overlooked.

  • Currency of the quotation. A price in one currency and a project budget in another carries an exposure that should be identified, not assumed away.
  • Payment schedule. Deposit, progress and balance proportions affect both cash flow and leverage. A very large deposit reduces the buyer's ability to correct a problem mid-production.
  • Validity period. A quotation for a factory-built product is usually valid for a defined window, and material costs may move outside it.
  • What triggers a price change. Specification changes, currency movement and freight rate movement are the three usual causes, and the contract should say which is borne by whom.

Ask for the quotation to state the currency, the validity date and the payment schedule on its face. These are not minor details; they are the terms.

Renegotiating After a Specification Change

Almost every project changes something after the first quotation, and the change process is where goodwill is either maintained or spent.

  • Change one thing at a time. A bundled list of changes cannot be priced accurately, and the resulting number is usually conservative.
  • Ask what the change displaces. An added feature often implies a removed one, and the credit is easy to forget.
  • Ask the knock-on question. A heavier specification may change the packing, the freight class or the crane requirement, none of which appear in the unit price.
  • Get the change documented with its price and its programme effect before work proceeds on it.
  • Expect a deadline. Late changes cost more because they interrupt a sequence, and this is a real cost rather than a negotiating position.

Reading a Very Low Number

Where one quotation is materially below the others, the difference is almost always in scope rather than in efficiency.

  • Check the delivery term. The most common source of an apparent gap.
  • Check what is excluded - foundations, cranage, utilities, customs clearance and installation support are the usual omissions.
  • Check the specification line by line, particularly glazing, insulation and MEP, where downgrades are invisible in a summary.
  • Check the documentation obligation. Drawings, manuals and test records are real deliverables with real cost.

A quotation that cannot be compared line by line is not a lower price; it is a different product. Landed cost is handled separately in our cost guide.

What to Ask for Instead of a Single Number

A single figure is the least useful form a quotation can take. A structured one takes the supplier slightly longer and saves the buyer weeks.

  • Unit price by model and specification, stated separately from freight.
  • Freight and insurance as a separate line, naming the delivery term.
  • Options and upgrades priced individually, so that they can be added or removed without re-quoting.
  • Spares and documentation as named deliverables.
  • Validity, currency and payment schedule on the face of the document.

With that structure, two quotations can be compared properly, and the comparison is where the decision actually gets made.

To obtain a structured quotation for a specific configuration and destination, send the model, specification and delivery point.

Talk to the Factory

Ready to Ride the 2026 Wave?

Get the latest catalog, pricing tiers and a layout sketch for your land — straight from the engineering team.