Modular Home Sizes: Module Widths and Floor Plans
Modular home sizes derived from the transport envelope: module width, room spans, corridor clearances, module arrangement and the ceiling height trade-off.
Modular home sizes are not chosen from a catalogue of preferences. They are derived, and the derivation starts with a road. A module has to fit within the transport envelope available on the route to your site, and every dimension in the finished plan — module width, room span, corridor width, ceiling height — is a consequence of that constraint. This page explains the dimensional logic only. It deliberately contains no table of legal vehicle limits by country, because those limits differ by jurisdiction, by route, and by the specific permit issued for a specific move; confirm them with the carrier and with the permit-issuing authority for your route. Terminology is on our modular terminology page, the pod equivalent on our glamping pod sizes page, plan detail on our capsule house floor plans page, and the on-site consequences on our installation cost page. No price per square metre appears here.
Transport Width Is the First Dimension
The widest thing that can travel on a road without a permit sets the widest module that can be built cheaply. Everything above that is possible but moves into a different category of move.
- Within-gauge width. A module sized to travel without an overwidth permit. This is the most common commercial position, and it is why so many modular plans share a similar narrow width.
- Permitted width. A module wider than the legal limit, moved under a permit with an escort and a route restriction. It buys internal width at the cost of a longer, less flexible and more schedule-exposed delivery.
- Deployed width. A unit that travels narrow and then expands on site — folding side sections, slide-outs. Its transport width and its occupied width are different numbers, and both matter.
Ask which of the three a supplier's stated size refers to. A width quoted without saying whether it is the travelling or the occupied dimension is not usable for planning, and the two can differ substantially. Where the widest available internal span matters to your brief — an open living space, a wide bedroom, a two-bed layout side by side — establish it at the drawing stage, because there are only three ways to get it: accept a permitted move, join two modules on site, or use a product that deploys.
What Module Width Does to Room Spans
Once the width is fixed, the plan follows from it, and three effects repeat in almost every modular plan.
- Rooms are as wide as the module, or half as wide. The natural subdivisions of a narrow module are the full width or a partition down the middle. Anything else leaves an awkward remainder that becomes storage or is wasted.
- A wide room needs a joint. If you want a living space wider than one module, the joint between two modules passes through it. That is entirely buildable, and it should be designed rather than tolerated — the ceiling and floor finishes across the joint have to be detailed, and the structural line has to be expressed or hidden deliberately.
- Furniture drives the plan more than area does. In a narrow plan, a bed, a sofa and a dining table each have a minimum width, and the room has to be wide enough for the furniture plus the circulation past it. Plan from the furniture, not from the area figure.
The practical test for any modular floor plan is to draw the furniture at scale on it before approving. It takes minutes and it is the only way to find the plan that measures well on paper and does not hold a sofa. Our floor plans page applies that test to the capsule house range specifically.
Corridor Widths and the Circulation Envelope
Circulation is where narrow-module plans most often fail, because it is the dimension nobody argues for until it is too late.
- Through-route width. A corridor that two people pass in comfortably needs more width than a corridor a single person uses. In a small unit, a corridor used by one person at a time can be narrower and still work; one on the route between the entrance and the main living space cannot.
- Door swing and door position. A hinged door consumes a quarter circle of floor. In a narrow plan, pocket or sliding doors routinely make the difference between a room that works and one that does not, and the choice has to be made before the wall is built.
- The working clearance at fixtures. Space in front of a bed, a toilet, a shower, a kitchen run and a washing machine. Each has a clearance that makes it usable, and in a compact plan those clearances compete for the same floor.
When two fixtures are placed in a narrow room, the clearance requirement is the binding constraint, not the fixture footprint. This is why a well-designed small modular plan can feel better to use than a larger badly planned one, and it is the argument for spending design time on circulation rather than on area.
How Modules Combine Into a Plan
With the width fixed and the circulation resolved, the remaining decision is the arrangement of modules. Four arrangements cover most of what is built:
- Linear. Modules placed end to end along one axis. Simple, efficient to transport and to set, and it produces a long narrow building with a long internal route.
- Parallel. Two or more modules set side by side, joined along their long edges, producing a wide plan from narrow boxes. The joint runs the length of the building and is the main detailing task.
- L-shaped or offset. Modules placed at right angles or offset to create sheltered outdoor space and to break the length. It improves the external appearance considerably and adds a corner detail to get right.
- Stacked. Modules placed one above another for a two-storey building. This changes the structural case and the crane requirement, and it concentrates the lifting into fewer, heavier, higher lifts.
Each arrangement changes the crane day as well as the plan. A stacked arrangement needs a taller lift and a higher-capacity crane than a linear one of the same total floor area, which is a real constraint on a site with limited access. Our installation cost page covers how crane selection follows from that.
Transport Height and the Ceiling
Height works the same way as width, with one important difference: the trailer deck is inside the measurement. The module does not get the full legal height for itself.
- Transport height = trailer deck height + module structure + internal ceiling height + roof build-up. Reducing internal ceiling height is the easiest way to stay within a limit, which is why transport height is a direct constraint on how a room feels.
- Overhead clearance on the specific route — bridges, structures and any temporary restriction — is what the limit is measured against. It varies by route, which is why a single national number is not a safe basis for design.
- Deployed height is available on some products, which gain internal volume on site that they cannot carry in transit.
Where ceiling height matters to the brief, the choice is the same three as for width: accept a permitted overheight move, sacrifice something else in the build-up, or choose a product that deploys. Confirm the achievable clearance on the actual route with the carrier and with the permit-issuing authority before the design is frozen. Requirements may vary by application, market and applicable standard.
A Sizing Sequence That Works
- Establish the largest envelope that can reach your site, by asking the carrier and the permit authority — not by looking up a general table.
- Decide whether you will travel within gauge, permit an oversize move, or use a deploying product.
- Derive the module width from that decision.
- Draw the furniture and the circulation clearances inside that width at scale.
- Choose the module arrangement that gives the plan you need, and note what it will do to the crane day.
- Trade ceiling height against transport height explicitly, with a number for each.
- Freeze all of it before drawing release, because after that point every change is a production change.
Worked in that order, sizing is a derivation. Worked in the reverse order — pick a plan, then see whether it can travel — it becomes a series of expensive compromises discovered late.
Talk to the Factory
Ready to Ride the 2026 Wave?
Get the latest catalog, pricing tiers and a layout sketch for your land — straight from the engineering team.


